ABCC Reset/Clear button (01.008.017)

ABCC ON/OFF switch (01.016.003)

Speed of light floor decal (AT4212) Some Assembly required. Used in Speed of Light only. Product size: 66.75 (in) x 37.50 (in) x 1.00 (in)

Monitor for Slam N Jam Ultra type D (310730015) Newest model of monitor for Slam N Jam Ultra. Monitor ONLY! Mounting hardware not included.  VGA and DVI ports.

Pearl Fishery Game Rotating Shaft (07.017.032)

ABCC light board (1-25E, 165MM) (01.019.008)

5050 soft strip lamp for Asphalt 9 (1.4.ZM9E2090) Found behind the seat of A9 DX. Driver PCB for this LED strip is LHM-445 (SOLD SEPERATELY!)

Artwork Cover Blank Coin for HyperShoot (AT4473)

Elastic strap for the HTC head strap Head strap for HTC Vive Pro 2 headset ONLY. Used in VR Rabbids UHD. Contact support@laigames.com for compatibility questions. 

Small Triangle Acrylic for Angry Birds Coin Crash pusher ledge (T20) This piece mounts to the pusher ledge in the center, if facing the game.  One per ledge. Clear acrylic. Pictured with brown protective film. 

Right Triangle Acrylic for Angry Birds Coin Crash pusher ledge (06.006.004) This piece mounts to the pusher on the right side if facing the game.  One per ledge.

Left Triangle Acrylic for Angry Birds Coin Crash pusher ledge (T04-01) This piece mounts to the pusher on the left side if facing the game.  One per ledge. Orange in color (pictured with brown protective film).

MDF Panel Bed 12 mm for Hypershoot (HSH-FW-004-R1)

LED Base Bracket for HYPERshoot (HSH-ASSY-027-R0)

Actuator repair kits for Virtual Rabbids (850-N122) This is to replace one half of one Actuator of Virtual Rabbids, The big ride.  This is the lower, non-electrical portion of the actuator, without a cable attached.   Be sure that...

Quixant QXI-200 Computer (EA1427) Used in ALL Color Match cabinets and Snap Shot 2 Software will have to be loaded based on Game Cabinet

3D printed cover for Virtual Rabbids Ultra HD This product is sold as a set of 4 pieces as pictured above. It is to help protect your Vive Pro 2 Headset from any excess use from your customers!  Hardware NOT INCLUDED.

Red Acrylic Card for Angry Birds Coin Crash (06.006.050-2)

Yellow Acrylic Card for Angry Birds Coin Crash (06.006.050-3)

Blue Acrylic Card for Angry Birds Coin Crash (06.006.050-1) 

White roller for the pushdeck of ABCC   18.9mm outer of the wheel diameter  17mm in length 

(NEW) Two-point safety belt (with spring) A9 DX (1.4.AQ000041) Previously LEA-405.

Infrared emitter for Asphalt 9 VR (1.4.ZD104141) (LEA-535) Hardware and bracket included.

Infrared ray receiver for Asphalt 9 VR (1.4.ZD104140) (LEA-527) (LEA-527) Hardware and bracket included. 

ASSY Ball Direction 1 for Hyperpitch (HP-ASSY-65-R0)

Board Display Round 1 ASSY for Let’s Bounce (PGI-ASSY-23-R0)

Pearl Fishery cable connector (01.016.031)

Metal Pusher ledge bracket #3 for ABCC (07.018.120) (TBG-135)    Please see the schematic picture attached.

Pusher ledge metal bracket #4 for ABCC (07.018.119) (TBG-100)   Please see the schematic picture attached.

Color Match Kickplate (CM1-ASSY-005-R0) (OBSOLETE) This item is obsolete and only available while supplies last! Sorry for any inconvenience! 

Rubber Edging for Hyperpitch Ball return (HM2996B) Used for the ball return metal piece at the bottom of the front cabinet. 

Plastic Side Cover 1 for Hyperpitch (polycarbonate) (HP-FP-028-RC)  This item is the newer, upgraded item from its previous revision of LPL-075.    Front half of Hyperpitch bottom acrylic

Power Supply for Mega Color Match (EA1291) input: 100 -240 VAC ~13.0A output: 12V = 88A

Hypershoot, MDF Front Metal Trim (HSH-FM-047-R1)  

Let's Bounce, Plywood Trimming 2 Right with Decal (PG1-FW-026-R-R0)  

Left Plywood Trimming with Decal for Let's Bounce (PG1-FW-026-L-R0)  Due to the rarity of this product, order must be placed for the item to be made from our factory.  2-3 week production lead time. Shipping time not included. 

Let's Bounce, Cover Plate Set of 2 R/L Join Side Panel (PG1-FM-108-R0)  

Let's Bounce Coin Door Assembly (PG1-ASSY-03-R0)  

Hardware Plastic, Acrylic for 55" Monitor, Virtual Rabbids (RB1-FP-03-R3)  

Virtual Rabbids, Header Sign Right w/Decal (RB1-FP-02-R-R2)  

Virtual Rabbids, Header Sign Left w/Decal (RB1-FP-01-L-R2)  

Virtual Rabbids, Security Teather for VR Head Set (RB1-FM-91-R3)  

Let's Bounce, LB Sensor Mounting (PG1-FM-120-R2)  

Let's Bounce, YLR 2 Way Front Base Light (PG1-C180)  

Let's Bounce HDPE Gutter Board (PG1-FP-024-R0) Item is made to order. Allow production lead time and shipping time after to apply.  

Hypershoot, Link Cable CPU J9 (internal) (HSH-C15-JST7WAY)  

Let's Bounce, Display Sign Assembly (PG1-ASSY-022-R1)  

Hypershoot, Acrylic PC Upper Left Header (CMC-FP-05-L-R0)  

Hypershoot, Acrylic PC Upper Right Header (CMC-FP-05-R-R0)  

Let's Bounce, Acrylic Deflector Shield DB (PG1-FP-030-R0)  

Hypershoot, Backboard Acrylic Cover (HSH-FP-008-R1)  

No.07 Clear Acrylic (495*528*5) (06.002.035)  

Plastic Under Seat for Rabbids VR (RB-FP-14-R0)  

Spacer Block Cover 1 Hyperpitch (HP-FP-018-R0)  

Cover Cable Back 1 SA for Rabbids VR (RB1-SA-67-R0)  

Convex circular button with lamp (including lamp holder) (1.4.AJ350021)  

Blue wheel long curve acrylic (CBGNO.16B)  

Blue wheel short curve acrylic (CBGNO.16A)  

Red wheel long curve acrylic (CBGNO.15B)  

Red wheel short curve acrylic (CBGNO.15A)  

Green wheel long curve acrylic (CBGNO.14B)  

Green wheel short curve acrylic (CBGNO.14A)  

Large round panel acrylic (PMCBNO.13-AC)  

Transparent acrylic right (CBNO.11-R)  

Transparent acrylic left (CBNO.11-L)  

Blue color acrylic right (CBNO.6-R)  

Blue color acrylic left (CBNO.6-L)  

Time Orbs Display acrylic FGTeeV (CBN0.20-R)  

Ticket display acrylic FGTeeV (CBN0.20-L)  

Bonus Display acrylic FGTeeV (CBNO.9)  

Mini Bonus display Acrylic FGTeeV (CBNO.8-R)  

Green color Super Bonus display Acrylic FGTeeV (opposite to Mini Bonus) (CBNO.8-L)  

Green lighted acylic FGTeeV left (CBNO.5-L)  

Green lighted acylic FGTeeV right (CBNO.5-R)  

Golden color Super bonus acrylic (CBNO.4)  

Green color Super Bonus Acrylic (CBNO.3)  

OUT OF TIME acrylic for FGTeeV (CBNO.7) Acrylic is one of the center pieces for the header assembly. 

Front light box PVC header B for FGTeeV (06.025.002)  

Screen acrylic fixing plate 3 (1.1.IG39A00090)  

A fixed screen acryl plate (1.1.IG39A00080)  

The acryl screen a fixed plate (1.1.IG39A00070)  

Big Pearl Acrylic for Pearl Fishery (PF-CR-NO.26) Mounts inside the Playfield area on the right side of pusher.

Small Pearl Acrylic for Pearl Fishery (PF-CR-NO.25) Mounts inside the Playfield area on the left side of pusher.

ABCC--COIN CRASH T19-POM ACRYLIC (ABCC-T19-POM)  

Acrylic Corner Bracket connect 2 (HSH-FM-061-R1)  

Acrylic force on top of console (1.7.IG39A00180)  

Acrylic Milk Rabbids Logo, RVR (RB1-FP-11-R2)  

Topic light box A9 DX (1.7.IG39B00140)  

Wheel trim A9 DX (1.7.IG39A00210)  

License plate acrylic A9 DX (1.7.IG39A00200)  

Acrylic on the right side of the console A9 DX + SD (1.7.IG39A00170)  

Acrylic on the left side of console A9 DX + SD (1.7.IG39A00160)  

Camera decoration panel A9 DX (1.7.IG39A00150)  

Hardware Plastic, Acrylic Grey Sensor 2 for Rabbids VR (RB1-FP-09-RO)  

Console top panel (190650022)  

Ball gate acrylic (190650026)  

Monitor top/bottom acrylic blocks (190650034)  

Monitor left/right acrylic blocks (190650035)